IK MULTIMEDIA

ACOUSTIC STAGE - ADVANCED MIC SYSTEM FOR ACOUSTI

$239.99
Your acoustic’s true tone, anywhere. The advanced digital microphone system for acoustic guitar iRig Acoustic Stage iRig Acoustic Stage is the new hi-tech solution for accurately reproducting the full sound of acoustic guitars and other instruments with studio-quality sound live on stage and in the studio. The combination of its advanced MEMS microphone and hi-quality preamp and DSP processing unit provides — for the first time ever — a break-through solution that offers hi-quality natural sound, advanced features, ease of installation and a convenience never seen before. Until now, getting your acoustic to sound like it does in the studio when playing on stage has been a difficult, if not impossible, task. Playing an acoustic on stage typically falls into two scenarios: using the onboard piezo or magnetic pickup system to project a fractional representation of your acoustic’s natural warm tone, or sitting stationary on stage with microphones in “the sweet spot” on your acoustic, dramatically limiting your ability to move. With iRig Acoustic Stage, you no longer have to sacrifice great acoustic tone when playing live. iRig Acoustic Stage gives you the best of both worlds — the beautiful, rich sound of your acoustic guitar as if it were mic’d up in the studio AND the freedom to move around without compromising your sound. Sound impossible? Read on… iRig Acoustic Stage is a patented, revolutionary digital microphone system that makes your guitar sound exactly as if it was captured with a classic recording studio setup, giving you full rich studio-quality sound on the stage. iRig Acoustic Stage It’s a compact acoustic microphone and advanced digital preamplifier and processing unit that recreates a studio microphone set-up providing you with all of the true character and tonal nuance of your acoustic in live playing situations. Simply clip the iRig Acoustic Stage’s microphone to the sound hole, attach it to the iRig Acoustic Stage pre-amplifier processor, then connect the preamp to your amplifier or mixer. iRig Acoustic Stage also features a “Cancel Feedback” button that gets rids of annoying frequency feedback during performance. iRig Acoustic Stage Once installed and active, you’ll immediately hear what you’ve been missing with your traditional live setup as your acoustic tone comes alive with vibrance, warmth, depth and earthy, woody tone. If you currently perform with an acoustic-electric, iRig Acoustic Stage can greatly enhance your guitar’s live tone. iRig Acoustic Stage features an AUX input with a blend control that lets you blend your guitar’s current pickup system with iRig Acoustic Stage giving you even greater tonal flexibility and a roundness to your sound like you’ve never heard before. Specs iRig Acoustic Stage Specifications Dedicated iRig Acoustic Microphone Microphone Type: MEMS Polar Pattern: omnidirectional Frequency Response: 30 Hz - 20 kHz, +/-3dB Max SPL: 130dB SPL Signal-to-Noise Ratio: 101 dBA Maximum soundboard thickness: 4mm / 0.16" Connections Dedicated iRig Acoustic Microphone Input: 2.5mm / 3/32" TS mono jack AUX Instrument Input Connector: 6.3mm / 1/4" TS mono jack AUX Instrument Input Impedance: 1 MOhms Analog Output Connector : 6.3mm / 1/4" TS mono jack, line-level, low impedance Analog Output Impedance: 50 Ohms (can drive long cables without any loss) Digital Output Connector: micro-USB DSP/Interface AD and DA Resolution: 32-bit Sampling Rate: 48 kHz Interface Output: USB class compliant audio output via micro-USB port Power: battery power (2xAA), USB bus power Battery Life: approximatively 12 hours of continuous usage with alkaline batteries and 15 hours with rechargeable high quality Ni-MH AA cells (2000 mAh and up) iRig Acoustic Stage Package includes iRig Acoustic Stage DSP/interface Dedicated iRig Acoustic microphone Belt clip Carrying case 2 x 1.5V AA Battery Dimensions DSP/Interface size: 101mm/3.98" x 72.3mm/2.85" x 23mm/0.91" (belt clip excluded) DSP/Interface weight: 99g/3.49oz (batteries excluded) Microphone size: 31.7mm/1.25" x 32.2mm/1.27" x 18.8mm/0.74" Microphone weight: 20g/0.71oz Microphone cable length: 150cm/59.1"

You may also like

Recently viewed